myigus
Корзина
(0)
Контактное лицо
Выбрать место

После того, как Вы введете почтовый индекс, мы сразу же назовем Вам контактного сотрудника, в соответствии с Вашим запросом.
См. все контакты
UA(RU)
Меню
  1. На главную страницу
  2. Joint bearings
  3. Angled / in-line ball and socket joints

Angled / in-line ball and socket joints

igubal® thrust bearings are corrosion-resistant, resistant to chemicals, dust and dirt, UV radiation and nuclear radiation. In addition, they are temperature resistant between -30 and +80 °C. The thrust bearings with a space-saving design consist of two components: an impact resistant and rigid ball pan and spherical washer that glides loosely in the pan, held by the shaft lying on it. The bearings are available in sizes from 5 to 20 mm. Upon request, igus® will manufacture special components with different dimensions.

Калькулятор срока службы

Калькулятор срока службы

Сферические подшипники с точным расчетом срока службы. После ввода параметров оборудования вы можете рассчитать ожидаемый срок службы сферических подшипников igubal®.
FAQs

FAQs

Frequently asked questions about igus® igubal® bearings

Due to order peaks, the delivery time for single items is 10-15 working days longer than stated. Please refer to our order confirmation for the specific delivery date.For urgent, short-term requirements, please contact us personally so that we can realise the delivery time necessary for you. You will find your contact person at the top of the menu under "My contact person", next to the language/country selection, or on this page.

Список
Плитка

Ассортимент: 18

Angled ball and socket joint. WGRM, igubal®
Angled ball and socket joint. WGRM, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Plastic ball studs
  • Material of ball cap: iglidur® W300
  • Connection for rotating and pivoting movements
  • Lightweight
  • Easy and quick assembly
  • Vibration dampening
  • Insensitive to dirt and dust
с 3,36 USD/Шт.
4 изделий, из которых готов к отправке из Кёльна:
4 через 24 - 48 часов
На страницу продукции

Angled ball and socket joint, WGLM, igubal®
Angled ball and socket joint, WGLM, igubal®
  • Thread direction: left-hand
  • Housing material: igumid G
  • Plastic ball studs
  • Material of ball cap: iglidur® W300
  • Connection for rotating and pivoting movements
  • Lightweight
  • Easy and quick assembly
  • Vibration dampening
  • Insensitive to dirt and dust
с 3,36 USD/Шт.
4 изделий, из которых готов к отправке из Кёльна:
4 через 24 - 48 часов
На страницу продукции

Angled ball and socket joint, WGRM, with steel pins, igubal®
Angled ball and socket joint, WGRM, with steel pins, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Ball stud made from galvanised steel
  • Material of ball cap: iglidur® W300
  • Connection for rotating and pivoting movements
  • Lightweight
  • Easy and quick assembly
  • Vibration dampening
  • Insensitive to dirt and dust
по запросу
На страницу продукции

Angled ball and socket joint, WGRM LC, low cost, igubal®
Angled ball and socket joint, WGRM LC, low cost, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Plastic ball studs
  • Connection for rotating and pivoting movements
  • Lightweight
  • Easy and quick assembly
  • Insensitive to dirt and dust
с 3,07 USD/Шт.
На страницу продукции

Angled ball and socket joint, WGLM LC, low cost, igubal®
Angled ball and socket joint, WGLM LC, low cost, igubal®
  • Thread direction: left-hand
  • Housing material: igumid G
  • Plastic ball studs
  • Connection for rotating and pivoting movements
  • Lightweight
  • Easy and quick assembly
  • Insensitive to dirt and dust
по запросу
На страницу продукции

Angled ball and socket joint, WGRM LC, low cost, with steel pins, igubal®
Angled ball and socket joint, WGRM LC, low cost, with steel pins, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Ball stud made from galvanised steel
  • Connection for rotating and pivoting movements
  • Lightweight
  • Easy and quick assembly
  • Insensitive to dirt and dust
с 3,07 USD/Шт.
На страницу продукции

Angled ball and socket joint, WGRM DE, removable, igubal®
Angled ball and socket joint, WGRM DE, removable, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Ball stud made out of plastic or metal
  • Connection for rotating and pivoting movements
  • lightweight
  • Easy assembly (75N) and disassembly
  • Insensitive to dirt and dust
с 5,39 USD/Шт.
На страницу продукции

In-line ball and socket joint, AGRM, igubal®
In-line ball and socket joint, AGRM, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Plastic ball studs
  • Material of ball cap: iglidur® W300
  • For all mechanical combinations
  • Very easy to assemble
  • Maintenance-free
  • Resistant to corrosion and chemicals
  • High vibration-dampening
с 3,63 USD/Шт.
1 изделий, из которых готов к отправке из Кёльна:
1 через 24 - 48 часов
На страницу продукции

In-line ball and socket joint, AGLM, igubal®
In-line ball and socket joint, AGLM, igubal®
  • Thread direction: left-hand
  • Housing material: igumid G
  • Plastic ball studs
  • Material of ball cap: iglidur® W300
  • For all mechanical combinations
  • Very easy to assemble
  • Maintenance-free
  • Resistant to corrosion and chemicals
  • High vibration-dampening
с 3,63 USD/Шт.
На страницу продукции

In-line ball and socket joint, AGRM, with steel pin, igubal®
In-line ball and socket joint, AGRM, with steel pin, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Ball stud made from galvanised steel
  • Material of ball cap: iglidur® W300
  • For all mechanical combinations
  • Very easy to assemble
  • Maintenance-free
  • Resistant to corrosion and chemicals
  • High vibration-dampening
по запросу
На страницу продукции

in-line ball and socket joint, AGRM LC, low-cost, igubal®
in-line ball and socket joint, AGRM LC, low-cost, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Plastic ball studs
  • For all mechanical combinations
  • Very easy to assemble
  • Maintenance-free
  • Resistant to corrosion and chemicals
по запросу
На страницу продукции

In-line ball and socket joint, AGLM LC, low-cost igubal®
In-line ball and socket joint, AGLM LC, low-cost igubal®
  • Thread direction: left-hand
  • Housing material: igumid G
  • Plastic ball studs
  • For all mechanical combinations
  • Very easy to assemble
  • Maintenance-free
  • Resistant to corrosion and chemicals
по запросу
На страницу продукции

In-line ball and socket joint, AGRM LC, with steel pin, igubal®
In-line ball and socket joint, AGRM LC, with steel pin, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Ball stud made from galvanised steel
  • For all mechanical combinations
  • Very easy to assemble
  • Maintenance-free
  • Resistant to corrosion and chemicals
по запросу
На страницу продукции

Angled ball and socket joint, WGLM DE, removable, igubal®
Angled ball and socket joint, WGLM DE, removable, igubal®
  • Thread direction: left-hand
  • Housing material: igumid G
  • Ball studs optionally made of stainless steel or plastic
  • Connection for rotating and pivoting movements
  • lightweight
  • Easy assembly (75N) and disassembly
  • Insensitive to dirt and dust
с 7,39 USD/Шт.
На страницу продукции

Angled ball and socket joint, WGLM LC MS, low cost, igubal®
Angled ball and socket joint, WGLM LC MS, low cost, igubal®
  • Thread direction: left-hand
  • Housing material: igumid G
  • Ball stud made from galvanised steel
  • Connection for rotating and pivoting movements
  • Lightweight
  • Easy and quick assembly
  • Insensitive to dirt and dust
по запросу
На страницу продукции

Консультации

Я с радостью лично отвечу на ваши вопросы

+49 2203 9649 0
Написать электронное письмо

Отправка и консультация

Лично:

С понедельника по пятницу с 9:00 до 17:30.

Online:

24h

The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.