Выберите место доставки

Выбор страницы страны / региона может влиять на различные факторы, такие как цена, варианты доставки и доступность продукта.
См. все доступные места доставки
Перейти www.igus.com
Отгрузка в течение 24 часов Расчет срока службы Прямая ссылка на скачивание файла CAD
myigus
Корзина
(0)
Контактное лицо
Выбрать место

После того, как Вы введете почтовый индекс, мы сразу же назовем Вам контактного сотрудника, в соответствии с Вашим запросом.
См. все контакты
UA(RU)
Меню
  1. На главную страницу
  2. Drive technology
  3. Electric motors
  4. Stepper motors
  5. Шаговый электродвигатель drylin® E с кодовым датчиком, NEMA 34

Шаговый электродвигатель drylin® E с кодовым датчиком, NEMA 34

  • Installation size: NEMA 34/flange dimension 86mm
  • Protection class: IP65 (shaft seal IP52)
  • Holding torque: 5.90Nm
  • Nominal current: 6.40A
  • Motor connections: Metric M17 connectors (pivoting ± 90°)

Не уверены, все ли подходит?

Загрузить файлы САПР
Expert system motor

Expert system motor

The right drylin E motor in just a few clicks. Simply enter your requirements and receive suitable suggestions.
Описание продукта
NEMA34: The power pack in the large installation size
 
Applications with higher loads are implemented using the largest series. Heavy-duty format adjustments or parallel dual axis setups are among its primary duties.
 
Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection.
 
The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water.
 
The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.
Технические характеристики
Загрузки

Другие решения

drylin® D1 motor control system for stepper, DC and EC/BLDC motors
drylin® D1 motor control system for stepper, DC and EC/BLDC motors

Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V

по запросу
Фланец электродвигателя для приводов ходовых винтов
Фланец электродвигателя для приводов ходовых винтов

Подходит для соединения igus®

по запросу
External braking resistors (power class 50/75/100 W) for EC/BLDC motors
External braking resistors (power class 50/75/100 W) for EC/BLDC motors

Suitable for NEMA17-34

по запросу
The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.