iglidur® tribotape® A160
The tribotape® liner from igus® is suitable for lining a wide range of surfaces and shapes subject to tribological stress, for optimising transport tasks, for machine beds, etc. With a thickness of only 0.5 - 1mm (including pressure-sensitive adhesive tape + 0.21mm), it requires very little space. The easy workability - it can be cut to size with scissors - and the optional self-adhesive tape make it suitable for almost unlimited applications.
The iglidur® tribotape® liner is also available with self-adhesive tape for quick and easy installation.
Compared to similarly thin plastic foils, the cost-effective iglidur® A160 tribotape® has a very high wear resistance.
Limits of bonding with pressure-sensitive adhesive tapes
There are limits to the adhesive strength of the pressure-sensitive adhesive tape with which this tribotape® is equipped. Unlike structural bonding, a wide range of environmental influences can affect the adhesive system and lead to the substrates detaching.
High-strength, durable adhesive bonds can generally only be achieved using chemically reactive one- and two-component adhesives. In these cases, adhesives, substrates and the pre-treatment of the substrates must be precisely matched to one another. The variety of possible combinations does not allow us to make any specifications or recommendations here.
We expressly point out that the pressure-sensitive adhesive tape of the igus® tribotape® can only facilitate the assembly and fixation of the tape. Experience has shown that the adhesive strength of the tape decreases over time. igus accepts no liability for an adequate adhesive system based on the pressure-sensitive adhesive tape.
Сертифікати та стандарти
