Flange bearings with 2 mounting holes, EFOI, igubal®, spherical ball iglidur® R

igubal® fixed flange bearings

The igubal® fixed flange bearings have been developed for shaft applications working parallel to the fixing holes.

The housing is made of igumid® G, a particularly impact-resistant, long fibre reinforced polymer. Suitable for temperatures from -30°C to +80°C in long-term use.

Here the spherical ball is made of iglidur® R, a low-cost material with a low coefficient of friction and good wear resistance at low to medium loads.

• Easy installation
• Compensation of misalignment
• Absolute corrosion resistance
• Lightweight
• Maintenance-free dry operation

Typical applications

• Plant construction
• Automation
• Agricultural machines
• Machine tools
• Food industry
  
  You will find many other areas of application in our industry solutions

 

When to use it? When chemical resistance is required If a cost-effective alternative is needed When dirt-resistant bearings are required If misalignments are to be compensated

When not to use it? If temperatures are higher than +80°C When an integrated fixing collar is required If diameters above 30 mm are required If rotation speeds of more than 0.5 m/s are to be achieved Use our filter options to find the suitable product

Application area
Since igubal® fixed flange bearings are designed for maintenance-free dry operation, they are especially suitable for applications in which access to the bearing is limited, in moist or wet environments or cleanroom environments. igubal® fixed flange bearings are also found in electric brushes, awnings, conveyor technology and bakery machines.Assembly

The 2-hole igubal® fixed flange bearings are equipped with elongated holes that allow easy adjustment. A precise alignment of the bearing housing is not required as the flange bearing automatically compensates for error. Special adjusting rings can be used to fix the shaft.