iglidur Z4 - cost-effective, heavy-duty material for plain bearings

Выберите место доставки

Выбор страницы страны / региона может влиять на различные факторы, такие как цена, варианты доставки и доступность продукта.

См. все доступные места доставки

Перейти www.igus.com

Отгрузка в течение 24 часов Расчет срока службы Прямая ссылка на скачивание файла CAD

myigus

Корзина

(0)

Контактное лицо

Выбрать место

После того, как Вы введете почтовый индекс, мы сразу же назовем Вам контактного сотрудника, в соответствии с Вашим запросом.

UA(RU)

iglidur SG03 plain bearing and thrust washer with felt seal

... High performance for high volumes ...

iglidur® Z4 - for high room temperatures and other extreme conditions

Extremely high compressive strength coupled with high elasticity enables iglidur® Z4 bearings to attain their prominent features in association with soft shafts, edge loads and impacts. At the same time, the bearings are suitable for temperatures up to +250°C. iglidur® Z4 was developed in particular for especially price-sensitive applications where the bearing material still had to meet high requirements.

Tech up

Good wear results in pivoting applications in combination with medium loads
Especially well-suited for use on aluminium HC and V2A shafts

Cost down

Maintenance-free properties reduce costs for lubrication and maintenance
Low coefficient of friction and wear
Cost-effective due to injection moulding

Proof

Comparison price dimension SM-2023-20: iglidur® Z €1.22/pc., iglidur Z4 €1.00/pc.
Service life can be calculated online

Sustainability

Environmentally friendly as no additional lubricants needed
Good coefficient of wear and therefore a long service life

igus supports the circular economy of plastics and is investing in chemical recycling. Learn more about this topic.

Make a non-binding enquiry

What are iglidur® materials made of?

All iglidur materials consist of three components: base polymers, fibres and fillers, solid lubricants, whereby the bearings made of iglidur materials are maintenance-free and lubrication-free. As it is not possible for one universal material to fulfil all tasks equally well, there are different iglidur materials. Each has a different composition of the three components and a different application area.

Base polymers

The base polymers are responsible for the iglidur materials' wear resistance. They ensure that the lubricants are not subjected to a surface pressure that is too high.

Fibres and fillers

These components strengthen the materials so that they withstand high forces or edge loads and can be used continuously.

Solid lubricants

They lubricate components made of iglidur materials independently and prevent friction. They are distributed in the entire material in the form of microscopic particles.