e-dispenser for shore-power supply

Save money and protect the environment

In 2017, we introduced the e-chain dispenser, a complete solution for a partially automated shore power supply system . This project-specific special solution was individually adapted to the requirements of the respective harbour and required an optimised new design for each new application.
Based on this idea and the experiences in the area of shore power supply, we basically redesigned the e-dispenser. The result is a modular system that can be used flexibly for various applications in the medium and low voltage range.
The new e-dispenser module can be variably combined with different components - e.g. with cranes, stationary structures or mobile transfer systems. This results in individually tailored energy supply solutions that can be efficiently adapted to specific project requirements.

ECS e-dispenser with guided energy chain for moving cable supply.

e-dispenser 2.0
Easy to use in existing systems

#modular

The e-dispenser 2.0 is the next generation of the high-performance conveyor unit for the TRHD.142.300.0 and impresses with maximum flexibility and safety. Whether in existing customer structures or in the proven igus dispenser solutions - the system can be integrated seamlessly.

Thanks to the e-dispenser, the TRHD.142 with charging connector is lowered safely and conveniently onto the vehicle to be charged - whether on land or on board.

For even higher loads, the TRHD.142.300.0 offers more than twice the breaking force of the next smaller 125 size - ideal for demanding applications with the highest safety requirements.

Enquire about e-dispenser 2.0 now

Tech up

Modular system: Ready-to-install triflex R e-chains® energy supply unit incl. cables & connectors; optional: drive; optional: additional steel structure
Safe, electrical operation of TRHD.142.300.0
Flexible in terms of extension length and installation options
Fail-safe through cable protection with triflex R energy chain TRC.125*
Defined minimum bend radius*

*Compared to commercially available systems with an open-guided multi-core cable

Cost down

Easy integration into existing structures/systems/installations
Single cores are more cost-effective than multi-core cables
Less space required due to use of single cores (due to smaller minimum bend radius*)
In the event of damage to a single cable, the entire cable package does not need to be replaced*
Standard components instead of project-specific special solutions
Time-saving, partially automated connection of the power supply

Proof

The dispenser principle is already being used successfully in many shore power applications
Test set-up at igus

Sustainability

Power supply through shore power that allows a ship's diesel engine to be switched off during berthing
No exhaust gases and noise on site
Less raw material required due to partial repair option instead of total replacement
Have your energy chain recycled at the end of its life cycle in the igus® Chainge® recycling programme. No matter what manufacturer.

Application examples:

Our e-dispenser has already been installed in various ports and has been a complete success, including in the USA:

As the first all-electric harbour tug, the eWolf from Crowley stands for emission-free operation and modern environmental technology. The customised system of our e-dispensers is specially designed to meet the high requirements of the eWolf and contributes significantly to efficiency and sustainability in harbour operations.

Find out more here

Shore power e-dispenser on the all-electric tugboat eWolf at San Diego port.

Find out more here

How it works:

Extending the energy chain:
The energy chain is moved from the shore to the ship to establish the power connection.
Power connection:
The cables in the chain are connected to the ship via a junction box and connector.
Stable supply:
While the ship is in port, the chain remains in position and reliably supplies it with shore power.
Return:
After depositing, the energy chain is retracted automatically or manually.

Cross-section with Ø 70 and six inner circles inside a round outer diameter.

Multi-core cable with 3 x 95²

Minimum bend radius Ø 70mm x 10 = 700mm

CFCRANE.PUR

* The bend radius within the e-dispenser has been reduced from 700mm to 300mm (57%) and outside the system the cables are protected from kinking with the TRC (bend radius 185mm).

Schematic circular graphic with dimensions Ø 135 and Ø 30 and colored holes.

3 x chainflex CFCRANE.PUR (95²) + triflex R TRC.125.182.0

Minimum bend radius Ø 30mm x 10 = 300mm

TRC.125.182.0

4-year guarantee - complete peace of mind!

The e-dispenser module is supplied as a ready-to-install plug & play solution:

Conveyor unit with triflex R energy chain, chainflex cables, connectors, junction box, harnessing - everything tested and with a 4-year guarantee.
With this, we offer a standard energy supply unit that is individually adapted to the situation on site and the respective customer requirements, developed and constructed as a complete solution.
Also for other industries, e.g. mechanical engineering, robotics and welding applications, the e-dispenser module represents an interesting energy supply solution. In all cases, users benefit from standardised (and hence tried, tested, and cost-effective) energy supply components.