Выберите место доставки

Выбор страницы страны / региона может влиять на различные факторы, такие как цена, варианты доставки и доступность продукта.
Контактное лицо
Выбрать место

После того, как Вы введете почтовый индекс, мы сразу же назовем Вам контактного сотрудника, в соответствии с Вашим запросом.

UA(RU)

igus® Chainfix parameters | Overview

 parameters    CFX   tiewrap plates   
   clamps   bolted, clip-on   
 Recommended standard    E4, E6, for all   easy chain®, E2/000,   
 for the following e-chains®:    KMA* with C-profile   E2 e-tubes, E4, E6   
   *Plastic-Metal mounting brackets    
When do I use this
igus® strain relief system:  
Standard for high
accelerations,
loads and
demanding
applications.
In many cables,
large cable Ø,
cables on top of each other.
For long travels,
cranes, offshore,
machine tools, high
speeds,
hydraulic cables.
When modularity
is required.  
Standard for many
applications
with medium
accelerations. In
unsupported, gliding,
hanging und standing
applications in general
machine and
machine tools construction.
For side by side cables.
Can be also used as individual part, e.g.
for switch cabinets or the like  
 
 When not to use:   No restriction   By large   
    cable diameters   
 Properties    
 Installation time index    +   +   
 Definable tensile strength    + +   –   
 Price index   2 1/21 
 Modularity    yes   yes   
 Dynamic    High to very high   high   
 Determination of tensile strength 1) in N with chainflex®  cable ties  
 Cables under different conditions   easydouble
 dry, PUR    1023   94   165  
 dry, PVC    891   455   601  
 dry, TPE    1580   97   224  
 water 2), PUR    947   65   150  
 water 2), PVC    917   447   528  
 water 2), TPE    1283   94   123  
 oil 3), PUR    500   96   137  
 oil 3), PVC    874   393   627  
 oil 3), TPE    1044   64   87  
     

1) Tested with igus® chainflex® cables made of jacket materials PVC (CF7.15.12), PUR (CF5.05.25), TPE (CF9.10.25 ) and a 15 mm Ø
2) Water, 60°C, 24h conditioning cabinet at 90% RF
3) Cables coated with oil. Oil type synthetic lubricating oil with Teflon
All strain relief systems were tightened with 1 Nm. Cable tie tightened manually.
+ + = best suitability | + = good suitability | + – = satisfactorily suitable | – = conditionally suitable

Price index
1/2 = low price category
1 1/2 = medium price category
3 = high price category
 parameters     Clips for C-profiles    Nuggets  
   or snap-on    Strain relief separators  
 Recommended standard      E4, E6, for all    for all KMA* with  
 for the following e-chains®:      KMA* with C-profile    C-profiles, top-hat rails  
     *Plastic-Metal mounting brackets    *Plastic-Metal mounting brackets  
When do I use this
igus® strain relief system:  
Low-priced, space-saving
strain relief for many
applications with
medium accelerations.
For cables on top of each other
or cables with the same
diameters.  
 Low-priced, quick
strain relief for simpler
application with little
space requirement at medium
accelerations. Can be also
used as individual part for rigid
laying like in
switch cabinets or the like  
 When not to uset:  
 By high    By high  
     stressing capacities    stressing capacities  
 Properties  
 Installation time index      + –    + –  
 Definable tensile strength      + –    –  
 Price index     2 1
 Modularity      yes    yes  
 Dynamic      medium    high  
 Determination of tensile strength 1) in N with chainflex® 
 Cables under different conditions  
 dry, PUR      66    356  
 dry, PVC      72    395  
 dry, TPE      103    286  
 water 2), PUR      51    255  
 water 2), PVC      55    312  
 water 2), TPE      86    170  
 oil 3), PUR      45    95  
 oil 3), PVC      59    402  
 oil 3), TPE      63    87  
 

1) Tested with igus® chainflex® cables made of jacket materials PVC (CF7.15.12), PUR (CF5.05.25), TPE (CF9.10.25 ) and a 15 mm Ø
2) Water, 60°C, 24h conditioning cabinet at 90% RF
3) Cables coated with oil. Oil type synthetic lubricating oil with Teflon
All strain relief systems were tightened with 1 Nm. Cable tie tightened manually.
+ + = best suitability | + = good suitability | + – = satisfactorily suitable | – = conditionally suitable

Price index
1/2 = low price category
1 1/2 = medium price category
3 = high price category
 parameters      strain relief -   CFB strain relief- 
   separators    connector system  
 Recommended standard      E2/000, E2 tubes,    E4, E6, for all  
 for the following e-chains®:      E6, T3    KMA* with C-profile  
       *Plastic-Metal
mounting brackets 
When do I use this
igus® strain relief system:  
 Combination of separator
and strain relief, ideal for
little space requirement. For
applications with medium
accelerations. For
smaller cable Ø. Ideal for
e-tubes.
For machine tools
and automation.  
Space-saving, modular
strain relief with many
cables in confined spaces.
For applications with
high accelerations
and loads, e.g.
machine tools.  
 When not to uset:  
 By high    No restriction  
     stressing capacities    
 Properties    
 Installation time index      +    + –  
 Definable tensile strength      –    +  
 Price index   1 1/2 3
 Modularity      yes    yes (special design )  
 Dynamic      high    High to very high  
 Determination of tensile strength 1) in N with
chainflex®  
 cable ties  
 Cables under different
conditions  
Easy double  
 dry, PUR      109    128    573  
 dry, PVC      339    289    330  
 dry, TPE      64    82    285  
 water 2), PUR      65    139    245  
 water 2), PVC      136    151    233  
 water 2), TPE      48    98    177  
 oil 3), PUR      19    89    203  
 oil 3), PVC      146    315    223  
 oil 3), TPE      77    33    165  

1) Tested with igus® chainflex® cables made of jacket materials PVC (CF7.15.12), PUR (CF5.05.25), TPE (CF9.10.25 ) and a 15 mm Ø
2) Water, 60°C, 24h conditioning cabinet at 90% RF
3) Cables coated with oil. Oil type synthetic lubricating oil with Teflon
All strain relief systems were tightened with 1 Nm. Cable tie tightened manually.
+ + = best suitability | + = good suitability | + – = satisfactorily suitable | – = conditionally suitable

Price index
1/2 = low price category
1 1/2 = medium price category
3 = high price category


Термины "Apiro", "AutoChain", "CFRIP", "chainflex", "chainge", "цепи для кранов", "ConProtect", "cradle-chain", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "dryway", "easy chain", "e-chain", "e-chain systems", quot;e-ketten", "e-kettensysteme", "e-loop", "energy chain", "energy chain systems", "enjoyneering", "e-skin", "e-spool", "fixflex", "flizz", "i.Cee", "ibow", "igear", "iglidur", "igubal", "igumid", "igus", "igus improves what moves", 73quot;igus:bike", "igusGO", "igutex", "iguverse", "iguversum", "kineKIT", "kopla", "manus", "motion plastics", "motion polymers", "motionary", "plastics for longer life", "print2mold", "Rawbot", "RBTX", "readycable", "readychain", "ReBeL" , "ReCyycle", "reguse", "robolink", "Rohbot", "savfe", "speedigus", "superwise", "take the dryway", "tribofilament", "triflex", "twisterchain", "when it moves, igus improves", "xirodur", "xiros" и "yes" являются юридически защищенными товарными знаками компании igus® GmbH/Кельн в Федеративной Республике Германия и, если применимо, в некоторых зарубежных странах. Это неполный список торговых марок (например. зарегистрированные товарные знаки) компании igus GmbH или аффилированных компаний igus в Германии, Европейском Союзе, США и/или других странах или юрисдикциях.

igus® GmbH заверяет потребителя о том, что не предлагает продукцию компаний Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosch Rexroth, SEW, Siemens, Stöber и иных производителей электроприводов, которые упоминаются на данном сайте. Предлагаемые изделия под маркой igus® - это изделия производства компании igus® GmbH