Выберите место доставки

Выбор страницы страны / региона может влиять на различные факторы, такие как цена, варианты доставки и доступность продукта.

См. все доступные места доставки

Перейти www.igus.com

Отгрузка в течение 24 часов Расчет срока службы Прямая ссылка на скачивание файла CAD

Контактное лицо

Выбрать место

После того, как Вы введете почтовый индекс, мы сразу же назовем Вам контактного сотрудника, в соответствии с Вашим запросом.

E2 R100 - Two-piece e-tube - Chip protection - Swivel-on lid

Since igus introduced the first openable (two-part) e-tubes in the middle of the 1980s, the product range has been supplemented with many additional parts and improvements. Energy tubes can be used in areas where there are hot chips, dirt and dust produced by woodworking, steelworks, pulp production, textile manufacture, in agriculture, coal stations and many other unfavourable ambient conditions. Decide in favour of the cost-effective alternative R100 series for applications involving slow and medium speeds.

Order free E2 R100 sample now

Inner height 21 mm

R117

Series R117

Inner height hi: 21mm
Inner widths Bi: 20 - 100mm
Bend radii R: 63 - 180mm
Pitch: 30.5mm

e-tube, snap-open along the inner radius on both sides

R118

Series R118

Inner height hi: 21mm
Inner widths Bi: 20 - 100mm
Bend radii R: 63 - 180mm
Pitch: 30.5mm

e-tube, snap-open along the outer radius on both sides

Inner height 40 mm

R157

Series R157

Inner height hi: 40mm
Inner widths Bi: 40 - 200mm
Bend radii R: 100 - 250mm
Pitch: 46mm

e-tube, snap-open along the inner radius on both sides

R158

Series R158

Inner height hi: 40mm
Inner widths Bi: 40 - 200mm
Bend radii R: 100 - 250mm
Pitch: 46mm

e-tube, snap-open along the outer radius on both sides

Inner height 50 mm

R167

Series R167

Inner height hi: 50mm
Inner widths Bi: 50 - 250mm
Bend radii R: 100 - 300mm
Pitch: 58.8mm

e-tube, snap-open along the inner radius on both sides

R168

Series R168

Inner height hi: 50mm
Inner widths Bi: 50 - 250mm
Bend radii R: 100 - 300mm
Pitch: 58.8mm

e-tube, snap-open along the outer radius on both sides

e-chain® selection aids

You can find the right e-chain® quickly by entering concrete parameters and with the aid of a comparison table.

Installation instructions

Joining and separating of the e-tubes.

Assembly Instructions

Application examples

Applications in various industrial sectors and in the igus® test laboratory.

E2 R100 and E2 R

Chip protection, swivelable

Excellent protection against chips (even hot chips)

Rugged and tight

Snap-open alternately along inside or outside - Swivelable or removable lid, short installation time

Space-saving through good internal/external dimensions ratio

Modular interior separation options

Double stop dog system for longer service life and long, unsupported lengths

Universal KMA mounting brackets with potential for "all-round" fastening

Typical industrial sectors and applications

Machine tools

Timber Processing Machines

General mechanical engineering etc

In all areas exposed to dirt and chips

iF Design award

iF Design Award for series R117/R118 and series R68

ESD classification

ESD classification: electrically conductive ESD versions upon request

UL94-V2 classification

UL94-V0 classifications upon request

igumid HT material

e-tubes made of igumid HT: hot chips (up to 850°C) cannot burn into them Available as custom design upon request.

готов к отправке через 72 часов из Германии

Срок поставки по запросу

Страна/регион

Выбрав свою страну, вы получите информацию о местных предложениях.

Языковые настройки

Выберите предпочтительный язык: