iglidur® G V0 - material data

Table of contents

The low-cost all-rounder for fire protection

Descriptive technical specifications

When do I use this material?

  • When a UL94 V0 classified plain bearing for normal environmental conditions is required

When do I use a different material?

  • When a UL94 V0 classified plain bearing for high-temperature applications is required -> iglidur X
  • When a standard plain bearing is required without having to meet specific fire safety standards -> iglidur G

Permissible pv values

Characteristic curve in a log-log chart with a descending line and X and Y axes.
Characteristic curve in a log-log chart with a descending line and X and Y axes.

Mechanical properties

Line graph with a downward curve from about 75 at x=20 to 28 at x=130.
Chart with two rising lines: +60 °C increases more than +23 °C.

Permissible surface speeds

Maximum surface speeds [m/s]RotatingOscillatingLinear
Long-term1.00.74.0
Short-term2.01.45.0

Temperatures

Min. application temperatureUpper application temperature, long-termUpper application temperature, short-termIn addition secure axially from
-40°C+130°C+210°C+100°C

Friction and wear

iglidur G V0dryGreasesOilWater
Coefficient of friction μ0.07-0.200.090.040.04
Chart with a slightly rising line on an X- and Y-axis coordinate grid.
The graph curve drops sharply, then levels off at a low value up to about 80.

Shaft materials

Bar chart with values A to G on the X-axis and a Y-scale up to 9.
Graph with two rising lines on the X and Y axes; the dotted line rises more steeply from about X=20.

Chemical resistance

ChemicalsResistance
Alcohols+ up to 0
Greases, oils without additives+
Hydrocarbons+
Fuels+
Strong alkalines0
Strong acids-
Diluted alkalines+
Diluted acids0 to -

Moisture absorption

Chart with a rising curve on the X and Y axes; the value increases clearly to the right.

Installation tolerances

Diameter d1 [mm]Housing H7 [mm]iglidur G V0 plain bearing E10 [mm]Shaft h9 [mm]
up to 3+0.000 +0.010+0.014 +0.054-0.025 +0.000
> 3 up to 6+0.000 +0.012+0.020 +0.068-0.030 +0.000
> 6 up to 10+0.000 +0.015+0.025 +0.083-0.036 +0.000
> 10 up to 18+0.000 +0.018+0.032 +0.102-0.043 +0.000
> 18 up to 30+0.000 +0.021+0.040 +0.124-0.052 +0.000
> 30 up to 50+0.000 +0.025+0.050 +0.150-0.062 +0.000
>50 to 80+0.000 +0.030+0.060 +0.180-0.074 +0.000
>80 to 120+0.000 +0.035+0.072 +0.212-0.087 +0.000
> 120 up to 180+0.000 +0.040+0.085 +0.245 -0.100 +0.000

Consulting

I look forward to answering your questions

Stefan Hemmersbach
Stefan Hemmersbach

Product Manager iglidur® bearings

+49 (0) 2203 9649 145Write e-mail

Shipping and consultation