igubal® pillow block bearings

igubal® pillow block bearings are particularly easy to install bearing units that compensate for misalignments and avoid edge pressure. The clipped version allows 30% higher strength to be achieved.

The housing is made of igumid® G, a particularly impact-resistant, long-fibre reinforced polymer. Suitable for temperatures from -30°C to +80°C in long-term use.

In standard spherical bearings, the spherical ball is made from iglidur® W300, a material known for low coefficient of friction in dry running operations and has an extremely low tendency to stick-slip. This is especially important for low loads and very slow movements.
   

• Maintenance-free dry operation
• Compensation of misalignment and edge loads
• 30% higher tensile strength compared to KSTM due to bionic design
• Can be combined with all materials for spherical balls for a wide range of requirements
• Faster delivery times and approx. 10% more cost-effective than KSTM
• Corrosion-resistant
• Vibration-dampening
• Suitable for rotating, oscillating and linear movements
• Lightweight

Typical applications

• Plant construction
• Automation
• Mechanical engineering
• Food industry
• Agriculture
  
  You can find many further application areas in our Отраслевые решения

 

When to use it? When chemical resistance is required If a cost-effective alternative is needed When dirt-resistant bearings are required If misalignments are to be compensated

When not to use it? If temperatures are higher than +80°C When an integrated fixing collar is required If diameters above 30 mm are required If rotation speeds of more than 0.5 m/s are to be achieved Чтобы найти нужный продукт, воспользуйтесь возможностями фильтрации

Application area
Since igubal® pillow block bearings are designed for maintenance-free dry operation, they are especially suitable for applications in which access to the bearing is limited, in moist or wet environments or cleanroom environments. The igubal® pillow block bearings are also found, for e.g., in electric brushes, awnings, conveyor technology, and bakery machines.

Installation

igubal® pillow block bearings are designed for installation with two screws. Exact alignment of the bearing housing is not necessary since the spherical bearing automatically compensates for alignment errors.
Special adjusting rings can be used to fix the shaft.