Versatile liner: the first iglidur® tribo-tape

The tribo-tape liner from igus® can be used to line a variety of tribologically stressed surfaces and shapes to optimise transportation tasks, for machine beds, etc. With a thickness of only 0.5 - 1 mm (including adhesive back + 0.15 mm), the space requirement is very low. The easy workability (the tape can be cut using scissors) and optional self-adhesive back on the liner result in almost unlimited possibilities for use.

Lubricant- and maintenance-free

Easy to cut

Adherent

Suitable for the smallest installation spaces


Typical applications:Mechanical engineering, materials handling, fixture construction, installation technology, etc.

A180 tribo-tape liner  
V400 tribo-tape liner  

Liner material: iglidur® A160

Low coefficient of friction

Best wear-resistance

Upto +90 °C


Compared to similar thin liners, the cost-effective iglidur® A160 tape has a very high wear resistance.

Liner material: iglidur® V400

Extremely wear resistant

Highly resistant to media

Upto +200 °C


Tests have shown the extremely wear-resistant and highly media and temperature-resistant iglidur® V400 tape to be up to 10 times more wear resistant than special products for machine beds and the like.

The iglidur® tribo-tape liner is also available with a self-adhesive back for quick and easy installation. With a self-adhesive back, iglidur® A160 can be used at temperatures of up to 70°C and V400 at temperatures of up to 170°C.

 
iglidur® V400 tribo-tape liner  
A160 tribo-tape liner wear

Wear rotating against stainless steel pin (1.4305) F= 35 N, v= 0.5 m/min
 
Y = Wear/mass decrease [mg/km]
 
A = polycarbonate (PC)
B = compound liner
C = polyetheretherketone (PEEK)
D = polyetheretherketone (PEEK) mod. 1
E = polyetheretherketone (PEEK) mod. 2
F = polyethylene terephthalate (PET)
G = iglidur® A160

 
V400 tribo-tape liner wear

Wear rotating against stainless steel pin (1.4305) F= 35 N, v= 0,5 m/min
 
Y = Wear/mass decrease [mg/km]
 
A = iglidur® V400
B = PTFE-bronze Compound

 

Liner: iglidur® tribo-tape A160

Delivery program:
Part No.:
Part Number Film thickness    
 A160-T-005-0020 0,5 - по запросу 
 A160-T-005-0020-G 0,71 with adhesive back по запросу 
 A160-T-005-0050 0,5 - по запросу 
 A160-T-005-0050-G 0,71 with adhesive back по запросу 
 A160-T-005-0100 0,71 - по запросу 
 A160-T-005-0100-G 0,71 with adhesive back по запросу 
 A160-T-005-0500 0,5 - по запросу 
 A160-T-005-0500-G 0,71 with adhesive back по запросу 
 A160-T-010-0500 1 - по запросу 
 A160-T-010-0500-G 1,21 with adhesive back по запросу 
Подробная информация о выбранной детали:
3-мерный КАД Образец заказа PDF Запрос цены Поступенчатые цены myCatalog

Liner: iglidur® tribo-tape V400

Delivery program:
Part No.:
Part Number Film thickness    
 V400-T-005-0120 0,5 - по запросу 
 V400-T-005-0120-G 0,71 with adhesive back по запросу 
Подробная информация о выбранной детали:
3-мерный КАД Образец заказа PDF Запрос цены Поступенчатые цены myCatalog
Ordering key:
Tribo-tape ordering key  

Adhesive back
G1 = temperature -20°C to +70°C
G2 = temperature -40°C to +170°C
 
width [mm]
 
thickness [mm]
 
Tape
 
iglidur®-Material

Technical data

Genera l features Unit iglidur® A160 iglidur® V400 test method
Density g/cm³ 1,0 1,51
Colour blue white
Max. humidity absorption at 23°C/50% R. H. Wt.-% 0,1 0,1 DIN 53495
Max. water absorption Wt.-% 0,1 0,2
Coefficient of surface friction, dynamic, against steel µ 0,09 - 0,19 0,15 - 0,20
pv value, max. (dry) MPa x m/s 0,25 0,5

Mechanical properties
Bending E-module MPa 1.151 4.500 DIN 53457
Tensile strength at +20 °C MPa 19 95 DIN 53452
compressive strength MPa 37 47
Maximum recommended surface pressure (20° C) MPa 15 45
Shore D-hardness 60 74 DIN 53505

Physical and thermal properties
Max. long term application temperature °C +90 +200
Max. short term application temperature °C +100 +240
Minimum application temperature °C -50 -50
thermal / heat conductivity [W/m x K] 0,30 0,24 ASTM C 177
Coefficient of thermal expansion (at 23° C) [K-1 x 10-5] 11 3 DIN 53752

Electrical properties
Specific forward resistance Ωcm > 1012 > 1012 DIN IEC 93
Surface resistance Ω > 1012 > 1012 DIN 53482

 
chemical resistance iglidur ® A160 iglidur ® V400
Alcohols + +
Hydrocarbons + +
Greases, oils without additives + +
Fuels + to 0 +
Diluted acids + +
Strong acids + +
Diluted bases + +
Strong bases + -
Radioactive rays [Gy] to 1 x 105 2 x 104
+ Resistant 0 conditionally resistant – not resistant

ООО «Геннлих Украина» ул. Краматорская 15
84100 г. Славянск
Донецкая область
Тел./Факс: +380626 66 59 42
Моб.: +38 068 595 25 39
e-Mail.: lintech@hennlich.ua

ООО "КОМИНПРО" ул. Ромэна Роллана 12, Офис 100
61058 Харьков
Тел./Факс: +38 057-7174914
Моб.: +38 050-4012625
e-Mail.: cominpro@gmail.com
www.cominpro.com.ua www.hennlich.ua

Контакт Электронная почта

myigus myCatalog
Нет минимальной стоимости заказа.
8,00-20,00 Доставка + Консультация Доставка от 24 часов* Бесплатные образцы

Более 100.000 наименований на складе! Поставка и консультация ежедневно с 8-20 часов!

Подписка на рассылку новостей
Общие условия заключения торговых сделок Контакт Общие примечания Заявление о защите приватности данных